ku111net

ku111net
全国服务电话:0531-83658718
热门搜索:济南方管,济南彩ku111net,济南岩棉板,济南型钢,济南楼承板,济南泡沫ku111net
ku111net动态 所在位置- 首页-新闻中心-ku111net动态-济南彩ku111net的相关使用以及计算规则

济南彩ku111net的相关使用以及计算规则

发布时间:2022-06-07 来源:/

现在很多工厂都有使用彩ku111net搭建敞篷,由于它具有很好的防水效果,在很多地区都比较受欢迎,接下来就为大家详细介绍一下彩ku111net的相关使用以及计算规则内容吧。
At present, many factories use colored steel tiles to build cabriolets. Because of its good waterproof effect, it is popular in many regions. Next, let's give you a detailed introduction to the use of colored steel tiles and the content of calculation rules.
济南彩ku111net的相关组成
Related components of Jinan color steel tile
1、钢屋架、钢网架
1. Steel roof truss and steel grid
(1)钢材重量按设计图纸所示尺寸计算,不扣除开孔、切边、肢切重量,不增加焊条、铆钉、螺栓重量。
(1) The steel weight shall be calculated according to the dimensions shown in the design drawings, without deducting the weight of opening, trimming and limb cutting, and without adding the weight of welding rod, rivet and bolt.
(2)不规则或多边形钢板,按其外部规则矩形面积计算。
(2) Irregular or polygonal steel plate shall be calculated according to its external regular rectangular area.
(3)钢网架结构应分为球面连接、钢板连接等形式。
(3) Steel grid structure shall be divided into spherical connection, steel plate connection and other forms.
(4)测量单位为t。
(4) The unit of measurement is t.
2、钢支架、钢桁架
2. Steel support, steel truss
(1)钢材重量按设计图纸所示尺寸计算。不得减少开孔、切边、临边的重量,不得增加焊条、铆钉、螺栓的重量。
(1) The steel weight shall be calculated according to the dimensions shown in the design drawings. It is not allowed to reduce the weight of opening, trimming and edge, or increase the weight of welding rod, rivet and bolt.
(2)不规则或多边形钢板,按其外部矩形面积计算。
(2) Irregular or polygonal steel plate shall be calculated according to its external rectangular area.
(3)测量单位为t。
(3) The unit of measurement is t.
3、钢柱、钢梁
3. Steel column and steel beam
(1)钢材重量按设计图纸所示尺寸计算。不得减少开孔、切边、临边的重量,不得增加焊条、铆钉、螺栓的重量。
(1) The steel weight shall be calculated according to the dimensions shown in the design drawings. It is not allowed to reduce the weight of opening, trimming and edge, or increase the weight of welding rod, rivet and bolt.
不规则或多边形钢板,按其外部矩形面积计算。
Irregular or polygonal steel plate shall be calculated according to its external rectangular area.
它包括实心腹板柱、空心腹板柱、钢管柱、钢梁和钢吊梁。测量单位是t。
It includes solid web column, hollow web column, steel pipe column, steel beam and steel hanging beam. The unit of measurement is t.
(2)钢柱上的带箍应计入钢柱的作业量。
(2) The band hoop on the steel column shall be included in the work volume of the steel column.
(3)钢管柱上的扣板、加劲环、衬管、支架等应计入钢管柱的工程量。
(3) The gusset plate, stiffening ring, lining pipe, support, etc. on the steel pipe column shall be included in the quantities of the steel pipe column.
(4)根据设计设置钢制动梁、钢制动桁架和汽车制动器时,应将其数量计入钢起重机梁中。
(4) When the steel brake beam, steel brake truss and automobile brake are set according to the design, their quantities shall be included in the steel crane beam.
济南彩ku111net
4、异形钢板地板、墙板
4. Special shaped steel plate floor and wallboard
异形钢板地板:根据设计图尺寸和铺设平面投影面积计算,不扣除0.3m2内的立柱、烟囱、孔洞面积。测量单位是m2。
Special shaped steel plate floor: calculated according to the size of the design drawing and the projected area of the laying plane, the area of columns, chimneys and holes within 0.3m2 shall not be deducted. The unit of measurement is m2.
异形钢板墙板:根据设计图尺寸和铺设面积计算。不扣除0.3m2以内的孔洞面积,不单独计算角落、边缘、窗台闪蒸面积。测量单位是m2。异形钢板楼板应浇筑钢筋混凝土,混凝土及钢筋按混凝土及钢筋混凝土中有关规定计算。
Special shaped steel plate wallboard: calculated according to the size of the design drawing and the laying area. The hole area within 0.3m2 shall not be deducted, and the flash area of corners, edges and windowsills shall not be calculated separately. The unit of measurement is m2. The special-shaped steel plate floor shall be poured with reinforced concrete, and the concrete and reinforcement shall be calculated according to the relevant provisions of concrete and reinforced concrete.
5、钢构件
5. Steel member
济南彩ku111net工程的计算规则:
Calculation rules for Jinan color steel tile project:
(1)钢材重量按设计图纸所示尺寸计算。如钢支架、钢檩条、钢吊顶框架、钢墙框架(包括柱、梁、连杆)、钢平台、钢走道、钢栏杆、钢漏斗、钢支架、零星钢构件等。不得减少开孔、切边、临边的重量,不得增加焊条、铆钉、螺栓的重量。
(1) The steel weight shall be calculated according to the dimensions shown in the design drawings. Such as steel supports, steel purlins, steel ceiling frames, steel wall frames (including columns, beams and connecting rods), steel platforms, steel walkways, steel railings, steel funnels, steel supports, sporadic steel members, etc. It is not allowed to reduce the weight of opening, trimming and edge, or increase the weight of welding rod, rivet and bolt.
(2)不规则或多边形钢板,按其外部矩形面积计算。测量单位是t。
(2) Irregular or polygonal steel plate shall be calculated according to its external rectangular area. The unit of measurement is t.
(6)金属网
(6) Metal mesh
根据济南彩ku111net工程设计图纸尺寸进行面积计算,包括生产、运输、安装、油漆等。
The area is calculated according to the dimensions of Jinan color steel tile engineering design drawings, including production, transportation, installation, painting, etc.
以上就是今天为大家介绍的关于济南彩ku111net的相关使用以及计算规则的相关内容,希望对大家能有所帮助,想要了解更多内容可以电话联系我们或者关注我们的网站www.jnhxtcg.com。
The above is the relevant content about the use and calculation rules of Jinan color steel tile introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website www.jnhxtcg com。
ku111net(中国)集团有限公司